This smart cup "Cuptime" comes from Shenzhen Mecare Network Technology. Please follow the instructions here to use the product properly:
- Please download the app "cuptime"from Apple app store or Google Play Store.
- If you can not find the product by scanning the code under the cup, please keep the app in searching mode and take out the battery and put it back. The cuptime will beep then show up in the app.
- If you are not using the cuptime, it will go into sleeping mode. But when you touch it, the LED will light on.
- To measure the water volume you have drunk, please follow these steps (make sure the cuptime is pairing with your cellphone): Add water to cuptime > wait 5 seconds > take up the cuptime and drink some water > place it back and wait 5 seconds > press the recording circle in the app to measure the water you drank.
- The following circumstances will be NOT recorded by the cuptime as water drinking:
*Pour off the water from the cuptime The water drank without placing the cuptime on table after you add water
*The water drank without placing the cuptime back on table after you drink
*The cuptime has been held at hand for more than 40 seconds so that the cuptime is automatically calibrated and the water drank can not be recorded.
*If the blue LED light is not on when you take up the cuptime, please check the battery or pair with your cellphone.
Questions & Answers
Have a Question?
Be the first to ask a question about this.